V5-6000 V5-6000 & RAMPAGE Team
¿Leyenda?, ¿Mito?, ¿Ficción?, No... ¡Realidad!
 
 FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

NEW 3Dfx ENGLISH FORUM - CLICK HERE

V5-6000 WORLDWIDE SITE
UPDATED 09-12-2011 / ADDED 2 V5-6000s Cards

RAMPAGE #A001 - UNDER PROGRESS

 
Post new topic   Reply to topic    V5-6000 & RAMPAGE Team Forum Index -> Specter 1000 AGP - Rework Zone
View previous topic :: View next topic  
Author Message
osckhar
Site Admin
Site Admin


Joined: 09 Dec 2005
Posts: 559
Location: Spain

PostPosted: Wed Jan 15, 2014 12:00 pm    Post subject: RAMPAGE #A001 - UNDER PROGRESS Reply with quote

Monday I received the pacakge from Michel. Rampy A0 is so beautifull.




05/12/2013

First I did is to know if 4 power rail are giving correct voltage.

Here all perfect.

C252 - 1.26
C276 - 2.3v
C210 - 1.9v
C232 - 3.2v

It is very good sign.

I was very curious why the test socket was so of modded, and why the the 2 PINS from test socket was removed since they are used for resgistration/alignment the test socket make perfect contact on the pads.
I removed the test socket and my surprise is the test socket was not good designed or REv A0 or Rev A0 had faills in the design. For such reason they had to remove both pins and make new holes for screws.


Here you can see how they tried to tin the pads for getting a major zone of contact. There are in each corner there are 1-2 pads not tinned, and in the test socket in same postion are pins are removed. So I guess they used such holes without pins for alignment and the golden pad helped via microscope.



Checking voltage values


Here what I found


In the A0 design for some reason there are not traces connect Power Rail 1.9V to pads marked in white color but it should be connected.

I need to continue making more tested but I guess why 3Dfx built a new PCB A1 with only one week of difference.

Note- white pads are connected between them and I could do wrapping and connect in rear socket the power Rail 1.9V but not sure if it is a worth and is better to let the card as is.

ADDED 23/12/2013

Finally I had some time free and I worked on Ramapage chip with damaged balls.

  • Before to reemplace damaged balls. Zone problem upper right corner




  • Once reemplaced damaged balls.



Chip looks very well. This time I found the manner to reemplace balls without damage the green solder mask.

About If chip will work now- I am not very optimist since seems all the chips decapped with open die had problems.

Not at home. I need to test it.

CHIP DOES NOT WORK


ADDED 15/01/2014

  • I have been working again on Rampage A0. Finally I found the way to add 1.9V to pads in white. I did a bridge between 2 pads and now all the white line pad is connected 1.9V POWER RAIL. Now what I need is work in the bridge connection for reducing the tickness since it is little high and It will not help to make perfect contact between pad and socket.



  • Here boards engineers already detected the BLUE POINT with 3.3V was not connected and they added the power rail across wrapping copper.



  • I also detected another problem on RN101. It is in short but at the moment It is not important since it only would affect image displayed and not wake up the card.



Main problem now is if I will be to able all the pads make perfect contact with test socket. It will be hard. Checking the pads the boards engineer expanded the pads with tin for trying to get the a big zone of contact. Even so I have detected many pads are not in touch with test pin socket.


- Oscar.
_________________
¿Leyenda? ¿Mito? ¿Ficción? No... ¡Realidad!
3Dfx Collection
Back to top
View user's profile Send private message Send e-mail Visit poster's website
Display posts from previous:   
Post new topic   Reply to topic    V5-6000 & RAMPAGE Team Forum Index -> Specter 1000 AGP - Rework Zone All times are GMT + 1 Hour
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


Powered by phpBB © 2001, 2002 phpBB Group